Monocure 3D RESINAWAY® is a non-flammable, safe, highly advanced UV resin cleaning solution. It is chemically engineered to quickly & effectively remove any uncured UV photopolymer resin from printed parts without unwanted surface cracks, cloudiness or white residue. It is a perfect cleaner for build plates, vats, instruments & surfaces. It is safer, quicker, more effective and longer lasting than Isopropyl Alcohol (IPA).
FOR BEST RESULTS: PRINT – RESINAWAY® – BLOW – POSTCURE – WASH
Use this cleaning agent as is, do not dilute with water. For best results, start with a “pre-wash” of RESINAWAY® in a separate container to remove excess resin using a soft brush to assist. Then place the object into an ultrasonic cleaning bath. Keep printed objects submerged in RESINAWAY® until the uncured resin has been removed. Once clear of resin, remove the object from bath, use compressed air to remove excess liquid, otherwise pat dry with a lint-free cloth. Then post-cure the part using a recommended LED 405nm light until the surface is tack free (approx. 5 mins at 30 watts). The final process is to rinse under running tap water. For cleaning vats, build plates, instruments & surfaces, rinse/soak/wipe with RESINAWAY® then wash with fresh water.